Products
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
- Product details
-
FLOOR-STANDING SERIES · STAINLESS STEEL EXPLOSION-PROOF INDUSTRIAL OVEN FD1200800800FBB
The Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB is the all-stainless member of our floor-standing explosion-proof series: the same pressure-relief safety concept as the painted-steel models, built throughout in stainless steel for cleanroom work, corrosive loads and parts that must not meet painted surfaces. The model number encodes the 1200 × 800 × 800 mm chamber class. A working video of the oven in operation is on this page. Also listed as a stainless steel explosion-proof drying oven or a floor-standing industrial oven.
Product ParametersModel FD1200800800FBB — Stainless Steel Explosion-Proof Industrial Oven Also Known As Stainless Steel Explosion-Proof Drying Oven · Floor-Standing Industrial Oven · Explosion-Proof Industrial Oven Construction Stainless steel body (as shown in the photograph and video) Chamber class 1200 × 800 × 800 mm class (per model number; exact figures confirmed with the quotation) Safety concept Floor-standing explosion-proof series: independent pressure-relief rear door, over-temperature protection Power / voltage / temperature range Set against your process — confirmed with the quotation The listing carries no parameter table, so no figures are quoted here. Power, voltage, controller and temperature range are confirmed with the quotation for your configuration.
Function SetStainless steel throughout — the body in the photograph and video is stainless steel, so the oven suits cleanroom areas, humid workshops and parts where painted steel would contaminate or corrode.
Explosion-proof series safety — built on the floor-standing explosion-proof platform with an independent pressure-relief rear door and over-temperature protection.
1200 × 800 × 800 mm chamber class — the large-size member of the series, for big transformers, coils and bulky painted parts.
Hot-air circulation drying — same forced-circulation principle as the rest of the series, for an even temperature field across the load.
Working video on file — the oven is shown running on the video linked below, so you can see the build and the controls before you buy.
Specified with your order — power, voltage and controller options are confirmed per application, as with the rest of the floor-standing series.
Product OverviewApplication Fields Features Advantages Solvent-bearing and corrosive loads, cleanroom drying, large transformers and coils, and parts that must stay clear of painted-steel contact. Stainless steel body, explosion-proof rear-door safety concept, 1200 × 800 × 800 mm class chamber, working video on file. The stainless answer inside the explosion-proof range — same platform, same safety chain, corrosion-proof shell. Explosion-Proof Oven RangeStandard (non explosion-proof) cabinet ovens are listed in the standard series — ask for both series with your enquiry.
Product Details
Overall view of the stainless steel body

Control side with function markings
The listing currently carries one photograph; further photographs of your configuration can be taken before shipment on request.
Product Demo Video
▶ Watch the working video (opens in a new tab)
The video shows the oven in operation on the factory floor.
Application ScenariosCleanroom & lab lines Stainless shell wipes down and does not shed paint, so the oven can sit inside controlled areas. Corrosive workloads Drying after flux, plating or wash processes that would eat into a painted housing over time. Large solvent loads Bulky freshly coated or washed parts in the 1200 × 800 × 800 mm class — big enough for full trolley-size work. How To UseInstall the oven with its rear panel facing a wall at the clearance stated on the drawings, so the relief door can open freely.
Connect the supply confirmed in your order and load the chamber evenly.
Set the working temperature and soak time on the controller confirmed with your configuration.
Start the run; the forced hot-air circulation evens the temperature across the load.
The alarm sounds and heating cuts at the end of the set time or at the over-temperature point.
After the shift, switch off, vent the chamber, and wipe the stainless interior once it has cooled.
Safety note: never block or wall over the explosion-proof rear door — it is the pressure-relief path. Keep the room ventilated when drying solvent-bearing parts.
FAQQ1: What does the model number FD1200800800FBB mean?
A: It encodes the 1200 × 800 × 800 mm chamber class of the explosion-proof series; the exact internal figures are confirmed with the quotation.
Q2: Why choose the stainless version?
A: Cleanrooms, humid or corrosive environments, and any product that must not touch painted steel — the stainless shell does not shed coating and wipes clean.
Q3: Is there a working video?
A: Yes — the video on this page shows the oven running; ask for a longer clip of your configuration if needed.
Q4: Does it have the pressure-relief rear door?
A: Yes — it belongs to the floor-standing explosion-proof series, whose safety concept is the independent pressure-relief rear door plus over-temperature protection.
Q5: What are the power and temperature specifications?
A: The listing does not print them, so we do not quote figures here — power, voltage and temperature range are confirmed with the quotation for your configuration.
Q6: Can I see it in the painted-steel version too?
A: Yes — the series includes the multi-size painted-steel model and the trolley-loading floor model; see the range table above.
Need a quotation for the FD1200800800FBB?
Tell us your load and environment — we confirm the stainless configuration and full datasheet with the quotation.
Get a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Product Inquiry
Please leave your message, we will contact you quickly after receiving it, thank you for your support!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
E-mail address:
Hotline:
English
繁体中文
简体中文
Deutsch
Tiếng Việt

