Products
CNC-Controlled Automatic Dip Soldering Machine — FD881 Auto Scraper Type
- Product details
-
AUTOMATIC SERIES · CNC-CONTROLLED AUTOMATIC DIP SOLDERING MACHINE (FD881 · AUTO SCRAPER TYPE)
The FD881 is a CNC-Controlled Automatic Dip Soldering Machine with an automatic solder scraper: the scraper clears the solder surface, the surface is detected and tracked automatically, and the soldering axis is driven by a stepper motor. The main controller is a CNC single-chip system and the pot is a 320 × 120 × 60 mm ceramic bath. It builds on the same dip-soldering platform used across the FD range, so fixtures and dip motion follow the same shop-floor logic. Built to order by FD in Dongguan, Guangdong, China. In the trade the same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Product ParametersModel FD-881 Also Known As CNC-Controlled Automatic Dip Soldering Machine · Automatic Tin Dipping Machine · Automatic Tinning Machine Functions Up/down · translation · solder-surface detection · solder scraper Solder Scraper Automatic scraping of the solder surface Solder-Surface Control Automatic detection and tracking Soldering Axis Stepper motor Main Controller CNC single-chip controller Solder Pot 320 × 120 × 60 mm ceramic Specifications are as listed in our catalogue. Fixtures and dip parameters are adapted to your part — send us a sample part for a proposal.
Function SetAutomatic solder scraper — the oxide skin on the solder surface is scraped away before the dip, so the pins enter clean solder
Automatic solder-surface detection — the head measures and follows the surface instead of assuming a fixed level
Stepper soldering axis — the soldering axis is driven by a stepper motor for repeatable dip depth
Translation stage — the fixture travels to the pot on a translation axis, so the operator only loads and unloads
CNC single-chip controller — the dip sequence is stored and repeated by the controller rather than by hand
320 × 120 × 60 mm ceramic pot — a ceramic solder bath that resists corrosion and holds its shape over long runs
These are the standard functions of the FD881 platform as supplied. Function combinations can be adapted to your process — tell us your soldering sequence and we will quote a matching configuration.
Product OverviewApplication FieldsTransformer Pin Soldering
Inductor & Coil Leads
Batch Dip Soldering
Repeatable Pin Finishing
FeaturesAutomatic Solder Scraper
Automatic Surface Tracking
Stepper Soldering Axis
320 × 120 × 60 mm Ceramic Pot
AdvantagesClean Solder Surface Every Dip
Repeatable Dip Depth
No Manual Holding
Factory Direct from Dongguan, China
CNC-Controlled Automatic Dip Soldering Machine RangeThe CNC-Controlled Automatic Dip Soldering Machine range covers rotary, auto-scraper, solder-cup and left-lift models. Every machine is built to order in Dongguan, Guangdong, China — send us your part, pin layout and output per shift for a machine recommendation and quotation.
Product Details
FD881 overall view

Working area

Solder pot detail
Photographs are of the standard model. Fixtures are adapted to your part.
Product Demo Video
Contact us for a live working video or online demonstration.
Application ScenariosDips That Start from a Clean Surface Every dip starts from a freshly scrapped solder surface, so pins are not coated with oxide that would have to be reworked. Repeatable Depth Without an Operator The soldering axis is stepper driven and the surface is tracked automatically, so the dipped length does not drift as the pot level falls. Batch Work on a Translation Stage Parts travel to the pot on the translation stage; the operator loads and unloads fixtures instead of holding parts over molten solder. Same Platform as the Rest of the Range The FD881 shares the FD dip-soldering platform, so fixtures and process settings carry over from other FD machines. How To UseLoad the fixture with your parts and set the platform for the batch.
Let the scraper clean the surface the automatic solder scraper removes the oxide skin before the dip.
Dip on the stepper axis the soldering axis lowers the part to the tracked solder surface, so the dipped length matches the setting.
Translate and unload the translation stage brings the part back to the loading position for unloading.
Keep the pot topped up the scraper and surface detection handle the rest through the shift; check the ceramic pot for build-up during routine maintenance.
⚠ Safety notice: molten solder operates at high temperature — never reach into the pot area while the machine runs, keep the work area dry (molten solder and water contact can cause splatter), use heat-resistant gloves during pot maintenance, and isolate the power supply before any service.Frequently Asked QuestionsQ1: What is a CNC-Controlled Automatic Dip Soldering Machine?
It is a machine that dips component pins into molten solder automatically instead of by hand, with the motion controlled by a CNC controller. The FD881 adds an automatic solder scraper and automatic solder-surface detection to the platform, so each dip starts from clean solder at a tracked level. The same machine is also called an automatic tin dipping machine, a CNC-Controlled Automatic Dip Soldering Machine or a lead tinning machine — "CNC" only describes the controller that runs the stored dip program; all these names refer to the same machine.
Q2: Why does the machine scrape the solder surface?
Molten solder forms an oxide skin on top. Scraping it away before the dip means the pins enter clean solder rather than oxide, which is what keeps the coating even and cuts rework.
Q3: How does it keep the dip depth constant?
The solder level drops as solder is used up. Instead of assuming a fixed height, the machine detects and tracks the surface, and the soldering axis is stepper driven, so the dipped length stays the same through the shift.
Q4: What size pot does it have?
The FD881 is supplied with a 320 × 120 × 60 mm ceramic solder pot. Pot size can be reviewed against your part when the configuration is quoted.
Q5: Can it be adapted to my part?
Yes. The machine is built to order in Dongguan, Guangdong, China and the fixtures are made to your part drawing. Send us your part, pin layout and output per shift for a configuration and quotation.
Q6: Which industries use a machine like this?
Transformer, inductor and coil manufacturers and any workshop that dip-solders leads in batches and needs the same result from the first part to the last.
Need clean, repeatable dip soldering in batches?OEM / ODM available · Automatic solder scraper · Surface detection and tracking · Ceramic solder pot 320 × 120 × 60 mm · Factory direct from Dongguan, ChinaGet a Quote
related products
Ultrasonic Solder Pot FD-20014070C | Flux-Free Tinning Machine 200x140 mm Bath
Ultrasonic solder pot FD-20014070C, 200x...
Ultrasonic Solder Pot FD-14014070C | Flux-Free Tinning Machine 140x140 mm Bath
Ultrasonic solder pot FD-14014070C, 140x...
Ultrasonic Solder Pot FD-12012060C | Flux-Free Tinning Machine 120x120 mm Bath
Ultrasonic solder pot FD-12012060C, 120x...
Stainless Steel Explosion-Proof Industrial Oven FD1200800800FBB
Stainless Steel Explosion-Proof Industri...
Product Inquiry
Please leave your message, we will contact you quickly after receiving it, thank you for your support!
common problem
Q
What are the characteristics of cigarette box three-dimensional packaging machine?
A
1. There is no need to adjust the height of the countertops on both sides of the machine when changing the mold, and there is no need to disassemble and assemble the discharge chain or put the hopper, which shortens the four-hour mold replacement time of the traditional machine to only 30 minutes.
2. Adopting a new dual insurance mechanism, the machine does not need to be shut down when it is not running synchronously, nor will it damage other parts.
3. The original one-way hand crank device prevents the machine from shaking in reverse, and the handwheel does not rotate during operation, making the operator safer.
4. The new double rotary film cutting knife can ensure that the machine can be used continuously for many years without a sharpening port, overcoming the defect that the traditional fixed single rotary film cutting blade is easy to wear.
Q
Automatic poker transparent film three-dimensional packaging machine packaging products?
A
Automatic poker transparent film three-dimensional packaging machine is mainly suitable for bulk poker, compressed biscuits, sachima, stickers, sticky notes, wafer biscuits and other bulk or multi-object collection of three-dimensional packaging.
E-mail address:
Hotline:
English
繁体中文
简体中文
Deutsch
Tiếng Việt

